True Ames Surf Fins Blog

True Ames Surf Fins New Video: Hexcore System Fins for FCS and Futures Fins Compatible July 20 2012

 

Here is a quick clip that showcases our line of Hexcore System Fins. These ultra light fins are available in FCS compatible and Futures Compatible. We use the Resin Transfer Method that allows us to construct a composite fin, inside which hexagonal pieces of lightweight coremat displace fiberglass and resin. The result is a fin that is up to 25% lighter than a normal fiberglass fin, yet retains the same positive flex and amazing drive! Whether you are surfing small beach breaks or solid reef breaks, we've got you covered with a wide variety of fins to fit your board and type of surfing.


How To Surf Better - Get New Fins - Get Hexcore March 18 2011

Looking to stay in the tube longer, surf more vertical, or just surf faster? We have a bunch of templates to fit your style, board, and surf conditions.  Our Hexcore technology fins give you more drive and perfect flex. These fins are available in FCS compatible, Futures compatible, and glass on.  Not only does the Hexcore perform better but is also 25% lighter than standard fiberglass fins.  Try a set today and feel the difference! Most people don't realize that the fins on their board have a very important role in how well they are surfing.  Fins that are too big are going to obviously make the board hard to turn, fins too small will slide and not give you drive.  Fine tuning your fins is trial and error but when you dial in the perfect setup, you will surf better for sure.  One of the main things you want to accomplish with your fin setup is to get the most drive and then turns will follow.  A Hexcore fin is going to give a lot of drive where plastic molded fins will not. If you're surfing smaller fun waves you may want to go with smaller fins to allow more release on your turn and better turning radius. When surfing bigger, more powerful waves, switch to larger fins for more drive and more drawn out turns to keep from sliding out on critical sections. The size of the fins in direct relation to the waves you are surfing is the first step.  Not all fin templates are created equal!  Don't be afraid to experiment with different fin templates. Here are some key point on fin design to help you choose the right surf fin. Flex Flex is a very important element in our designs. Many of our fins come with a tuned flex. A fin that has flex can be very different than a fin without flex. The flex concept brings to life an otherwise average ride. Cutbacks have more power and bottom turns have more projection. Foils True Ames Fins incorporate a constant foil which means you will not find any flat spots on our fins that may cause water disturbance which will ultimately cause poor performance. Smaller fins do not need to be so thick to have the proper foil. Size The depth of your fins is measured from base to tip vertically. Adjusting your fin size will affect the performance of your board. Larger fins provide more stability and control, so a larger board will need bigger fins. Template The outline of a fin is what determines the area and the look. The way the area is distributed on the fin is what makes fins individual and work in so many different ways. A wide base fin with a wide tip is the most stable but not forgiving. A narrow base fin with a narrow tip will be very loose and fast but unstable at slow speeds. The fin’s sweep (or rake angle) affects the board’s ability to carve turns. A more vertical fin will make tight turns and fast directional changes while a more raked fin will carve wider arcs and handle more power through turns. Tail width is also a factor in fin choice. Narrow tail boards do not require deep fins because there is less distance from the fin to the rail. A wide board requires a deeper fin than a narrower board. range.

Fishy Fins February 23 2011

If your looking to try some new fins on your Fish, take a look at these.  From solid fiberglass to Hexcore to wood... We've got you covered.  Our Twin fins come in FCS compatible, Futures compatible, and Glass ons.

Danny Ching Wins: 2010 Ta-Hoe Nalu SUP Event August 25 2010

Lake Tahoe, CA (August, 24th 2010) In windy, cold and over-cast conditions, paddlers at the 2010 Ta-Hoe Nalu SUP event still took to the water. As the weather service predicted, a summer storm brewed on the lake resulting in consistent 25 MPH wind gusts. The event coordinators decided that the Elite SUP race would be run in a similar fashion to the world renowned Battle of the Paddle event. Athletes participating in the elite event were required to paddle .5 miles straight upwind, turn 180 degrees on the Quiksilver buoy, and surf their way back to the beach for a 100 yard beach run. This course was completed four times. As one of the premiere paddling events at Lake Tahoe, Vertra’s Paddlesports Team performed top notch! Vertra’s own Danny Ching paddled to an impressive and comfortable 1st place finish in the men’s elite SUP race taking home 2500$. In his normal fashion Ching got out to an early lead, and built the gap on the rest of the field on each turn. “I just went out hard, and tried to hold on,” commented Ching. Danny is considered by his peers as being one of the sports best and is second to none in paddling in all types of weather conditions. This weekends 25 MPH wind gusts proved to be no different as he powered his way up wind, and used his surfing knowledge from years of paddling the OC1 to build a sizable lead on the rest of the competitors. The young sixteen-year-old Matt Becker battled his way in the top of the pack throughout the entire race. “It was tough to push it up wind,” commented Becker. Matt who just returned back to the States after a SUP surf expedition in Colombia found the best parks of the race surfing the .5 mile downwind leg of the race. “It was a great event today, a good starting point as I prepare for the Hennessey’s International Race and Battle of the Paddle in a few months.”

System Fins Are In! June 08 2010

Whether you prefer FCS or Futures Compatible fins, we have a selection of both for you at True Ames Fins.  Our Resin Transfer Method allows us to construct a composite fin that is 25% lighter than a normal fiberglass fin yet retains the same positive flex and amazing drive.  We carry a variety of colors and fin designs for twin fins, thrusters, quad and bonzer setups. Using the FCS or Futures Compatible fins for travel is ideal.  The are also great for trying out different setups on different boards. Sometimes you just don't realize how much the fin can change the way a board rides. Go ahead try a new set of True Ames Fins and feel the difference! trueames.com

Stronger, Lighter Fins : Glass ons, FCS and Futures Compatible March 02 2010

The Resin Transfer Method allows us to construct a composit fin, inside which hexagonal pieces of lightweight coremat displace fiberglass and resin. The Result: A fin that is up to 25% lighter thana a normal fiberglas fin yet retains the same positive flex and amazing drive We offer the best surf fins in avariety of Hexcore templates and for futures and FCS compatible also available in glass ons. You'll notive a huge difference if your surfing and overall drive of the board when you put a set of these true ames hexcore fins on your board.  See the website for more info and available templates.

Sacred Craft February 26 2010

APRIL 10 & 11, 2010 VENTURA COUNTY FAIR GROUNDS True Ames will be at Booth#A9.  Stop by and take a look at the latest fins and more! [youtube=http://www.youtube.com/watch?v=IliaP3hFmRU]

The Channel Islands - Tri Fin February 05 2010

[youtube=http://www.youtube.com/watch?v=7jA6E1cbIuY&hl=en_US&fs=1&rel=0&color1=0x006699&color2=0x54abd6] The first in a video series that highlights on True Ames Surf Fins. This video shows the Channel Islands Futures compatible fin. The channel islands fin is good for mid to heavy weight surfers, specifically for pointbreaks like Rincon. This fin is also available in glass on, and FCS compatible. These Hexcore fins are very light and durable, giving you  the best fin for your shortboard. Check out the video clip for more info and to see this fin on our online store click here. Stay tuned for weekly Surf Fin highlights. Next week we will look at one of our featured longboard fins.

How To Choose The Best Surf Fins for Your Board. December 11 2009

There is a lot to know about choosing the best fins for your surfboard. Here are a few tips and important factors in picking out the right fin for your style. Remember that the best surf fins are going to be in the right proportion to you and your board. Construction All fins are not created equal! We take advantage of a vast amount of fin manufacturing experience to create fins that work in many different applications. Designs are executed using the required materials and foils to create the highest performance fins available today. Flex Flex is a very important element in our designs. Many of our fins come with a tuned flex. A fin that has flex can be very different than a fin without flex. The flex concept brings to life an otherwise average ride. Cutbacks have more power and bottom turns have more projection. Foils True Ames Fins incorporate a constant foil which means you will not find any flat spots on our fins that may cause water disturbance which will ultimately cause poor performance. Our bigger solid color fins are foiled from 7/16” solid 6oz. glass sheet stock. Smaller fins do not need to be so thick to have the proper foil. Size The depth of your fins is measured from base to tip vertically. Adjusting your fin size will affect the performance of your board. Larger fins provide more stability and control, so a larger board will need bigger fins. For example a 9’6” single fin board needs at least a 9.5” fin and if nose riding is most important to you than you will find bigger fins give more forward control. Template The outline of a fin is what determines the area and the look. The way the area is distributed on the fin is what makes fins individual and work in so many different ways. A wide base fin with a wide tip is the most stable but not forgiving. A narrow base fin with a narrow tip will be very loose and fast but unstable at slow speeds. The fin’s sweep (or rake angle) affects the board’s ability to carve turns. A more vertical fin will make tight turns and fast directional changes while a more raked fin will carve wider arcs and handle more power through turns. Tail width is also a factor in fin choice. Narrow tail boards do not require deep fins because there is less distance from the fin to the rail. A wide board requires a deeper fin than a narrower board. For example an 8’ egg style board that is on the wide side should use about an 8.5” to 9.0” fin. A narrow tail single fin board that is 7’6” can use a fin in the 7” to 8” range.

Timmy Patterson Quad Fins Available in FCS or Futures Compatible November 20 2009

These Timmy Patterson Quad fins are suited for the all around quad shortboard Timmy Patterson Quad fins (set of 4)  These fins are tested and are best suited for the all around quad shortboard. The back fins have 80/20 foil. A very well balanced quad set! front fins: HEIGHT: 4.35” / 111 mm  BASE: 4.30” / 109 mm back fins: HEIGHT: 3.95” / 100 mm BASE: 3.85” / 98 mm If you're looking for a super light and fast quad fin setup then the Timmy Patterson Quad fins are for you. Quads first came onto the scene in the early 80's and eventually lost popularity amidst the thrusters and twin fins.  Now with our lighter stronger boards the quad fins are making a comeback. Even Kelly Slater rips on his quad in contests all over the world.  Riding a quad is like having an extra boost of speed when you need it most. With the Timmy Patterson quad set up your board will go as fast as you could ever want, and will still maintain the responsiveness you need to get vertical in tight situations. Don't just limit your quad riding experience to "small" surf. Having those four fins can hold you in to some good sized surf. In hollow conditions you will see how having the quad keeps you higher up in the face of the wave allowing you to make more barrels.

Bonzer Runners- Bamboo Truelite September 18 2009

Bonzer runners Bonzer Runners- Bamboo Truelite front fins: base: 5.31” / 131 mm height: 2.75” / 71 mm back fins: base: 4.75” / 121 mm height: 2.31” / 59 mm These lightweight runners are constructed with True Lite hexcore and real bamboo wood. The result is a high performance super lite set-up. Save 30% on the weight over traditional glass runners.