True Ames Surf Fins Blog

SURF EXPO 2013 / SEPT 6-8 / ORLANDO, FL September 03 2013, 0 Comments

single fin, fcs fins, future fins, SUP fins

It's that time of year again, Surf Expo in Orlando, FL is happening this week Friday 9/6 -9/8.  Stop by the True Ames Booth #969. We will have a full selection of our latest surf fins and SUP fins.  Lots of different fins in stock right now for your single fin, twin fin, thruster, quads, and we offer different 2+1 setups for longboards and SUP boards.  our system fins are available in FCS and Futures Compatible.

surf-expo-true-ames-fins

For more than three decades Chuck Ames and the True Ames Fins team have been at the forefront of the fiberglass fin industry. Balancing a surfer-driven design ethic with an unyielding commitment to innovation and production excellence, we have forged an international reputation in the surfing and windsurfing communities as the guys who, simply put, make your waveriding vehicle of choice work even better. After all, as Chuck likes to say, “You could have the best board in the world shaped for you but, if the fins are off, it won’t go- the thing just won’t work the way it should.” Day in and day out, it is our goal at True Ames to make sure such fin failures never happen to you.


True Ames Surf Fins New Video: Hexcore System Fins for FCS and Futures Fins Compatible July 20 2012, 0 Comments

 

Here is a quick clip that showcases our line of Hexcore System Fins. These ultra light fins are available in FCS compatible and Futures Compatible. We use the Resin Transfer Method that allows us to construct a composite fin, inside which hexagonal pieces of lightweight coremat displace fiberglass and resin. The result is a fin that is up to 25% lighter than a normal fiberglass fin, yet retains the same positive flex and amazing drive! Whether you are surfing small beach breaks or solid reef breaks, we've got you covered with a wide variety of fins to fit your board and type of surfing.


How To Surf Better - Get New Fins - Get Hexcore March 18 2011, 0 Comments

Looking to stay in the tube longer, surf more vertical, or just surf faster? We have a bunch of templates to fit your style, board, and surf conditions.  Our Hexcore technology fins give you more drive and perfect flex. These fins are available in FCS compatible, Futures compatible, and glass on.  Not only does the Hexcore perform better but is also 25% lighter than standard fiberglass fins.  Try a set today and feel the difference! Most people don't realize that the fins on their board have a very important role in how well they are surfing.  Fins that are too big are going to obviously make the board hard to turn, fins too small will slide and not give you drive.  Fine tuning your fins is trial and error but when you dial in the perfect setup, you will surf better for sure.  One of the main things you want to accomplish with your fin setup is to get the most drive and then turns will follow.  A Hexcore fin is going to give a lot of drive where plastic molded fins will not. If you're surfing smaller fun waves you may want to go with smaller fins to allow more release on your turn and better turning radius. When surfing bigger, more powerful waves, switch to larger fins for more drive and more drawn out turns to keep from sliding out on critical sections. The size of the fins in direct relation to the waves you are surfing is the first step.  Not all fin templates are created equal!  Don't be afraid to experiment with different fin templates. Here are some key point on fin design to help you choose the right surf fin. Flex Flex is a very important element in our designs. Many of our fins come with a tuned flex. A fin that has flex can be very different than a fin without flex. The flex concept brings to life an otherwise average ride. Cutbacks have more power and bottom turns have more projection. Foils True Ames Fins incorporate a constant foil which means you will not find any flat spots on our fins that may cause water disturbance which will ultimately cause poor performance. Smaller fins do not need to be so thick to have the proper foil. Size The depth of your fins is measured from base to tip vertically. Adjusting your fin size will affect the performance of your board. Larger fins provide more stability and control, so a larger board will need bigger fins. Template The outline of a fin is what determines the area and the look. The way the area is distributed on the fin is what makes fins individual and work in so many different ways. A wide base fin with a wide tip is the most stable but not forgiving. A narrow base fin with a narrow tip will be very loose and fast but unstable at slow speeds. The fin’s sweep (or rake angle) affects the board’s ability to carve turns. A more vertical fin will make tight turns and fast directional changes while a more raked fin will carve wider arcs and handle more power through turns. Tail width is also a factor in fin choice. Narrow tail boards do not require deep fins because there is less distance from the fin to the rail. A wide board requires a deeper fin than a narrower board. range.

FINS, FINS, FINS..... February 16 2011, 0 Comments

Just a few of our selection here at True Ames Check out the site for our full selection and latest products. This morning, under the variable clouds of a thousand fractions of sky, perched on the dented hoods of cars domestic to a hundred countries, we are looking at the same waves we looked at yesterday. As the other 99.9% of surfers, we’ve cheated, become infidels to the savagely nomadic wavesledder wed to our minds long ago. We’ve instead become frontiersman of our own backyards, cartographers to an infinity of patterns across the wave faces we know best. For over 30 years at True Ames, we’ve forged enterprise and folk science from our desire to redesign these lines in as many languages as we can learn. Faster. Stronger. Lighter. Stranger. Each member of our little family of designs is an opportunity for reinventing our turns and reliving old ones, this time with a little magic, and next time with a little more. Enjoy. 

System Fins Are In! June 08 2010, 0 Comments

Whether you prefer FCS or Futures Compatible fins, we have a selection of both for you at True Ames Fins.  Our Resin Transfer Method allows us to construct a composite fin that is 25% lighter than a normal fiberglass fin yet retains the same positive flex and amazing drive.  We carry a variety of colors and fin designs for twin fins, thrusters, quad and bonzer setups. Using the FCS or Futures Compatible fins for travel is ideal.  The are also great for trying out different setups on different boards. Sometimes you just don't realize how much the fin can change the way a board rides. Go ahead try a new set of True Ames Fins and feel the difference! trueames.com